[1]劉權,劉百寬,田曉利,等.基于正交試驗的電工級氧化鎂改性粉配比優化[J].中國材料進展,2023,42(10):826-832.[doi:10.7502/j.issn.1674-3962.202108018]
LIU Quan,LIU Baikuan,TIAN Xiaoli,et al.Optimization Research of Modified Electrical Grade Magnesium Oxide Powder Ratio Based on Orthogonal Test[J].MATERIALS CHINA,2023,42(10):826-832.[doi:10.7502/j.issn.1674-3962.202108018]
點擊復制
基于正交試驗的電工級氧化鎂改性粉配比優化(
)
中國材料進展[ISSN:1674-3962/CN:61-1473/TG]
- 卷:
-
42
- 期數:
-
2023年第10期
- 頁碼:
-
826-832
- 欄目:
-
- 出版日期:
-
2023-10-31
文章信息/Info
- Title:
-
Optimization Research of Modified Electrical Grade Magnesium Oxide Powder Ratio Based on Orthogonal Test
- 文章編號:
-
1674-3962(2023)10-0826-07
- 作者:
-
劉權1; 劉百寬1; 2; 田曉利2; 李志勛2; 許雨1
-
1. 西安建筑科技大學材料科學與工程學院，陜西 西安 710055
2. 濮陽濮耐高溫材料（集團）股份有限公司，河南 濮陽 457100
- Author(s):
-
LIU Quan1; LIU Baikuan1; 2; TIAN Xiaoli2; LI Zhixun2; XU Yu1
-
1. College of Materials Science and Engineering, Xi’an University of Architecture and Technology，Xi’an 710055，China
2. Puyang Refractories Group Co, Ltd，Puyang 457100, China
-
- 關鍵詞:
-
電工級氧化鎂改性; 正交試驗; 極差法; 矩陣分析法; 指標值預估; 最優配比
- Keywords:
-
electrical grade magnesium oxide powder modification; orthogonal test; range method; matrix analysis method; index value prediction method; optimal mix proportion
- 分類號:
-
TQ132.2
- DOI:
-
10.7502/j.issn.1674-3962.202108018
- 文獻標志碼:
-
A
- 摘要:
-
為改善電工級氧化鎂普粉電性能的不足，使改性后電工級氧化鎂粉更加適配電熱管制造行業，通過加入白炭黑、電工級氧化鎂用添加劑和硅油的方法對普粉進行改性，采用正交試驗法設計25組配比組合進行試驗。通過極差法分析單一指標（冷態絕緣耐壓強度、泄漏電流和熱態絕緣耐壓強度）下的最優配比，并利用矩陣分析法實現多目標綜合分析優化，得到優化后的組合配比，運用指標值預估法預測最終配比的電工級氧化鎂改性粉的電性能。結果表明：以冷態和熱態絕緣耐壓強度為指標時，白炭黑摻量為主要影響因素；以泄漏電流為指標時，硅油摻量為主要影響因素，其次是電工級氧化鎂用添加劑摻量。多目標優化選擇的改性粉配比為白炭黑摻量0.25%(質量分?jǐn)?shù)，下同)，電工級氧化鎂用添加劑摻量2%，硅油摻量0.25%。最終配比電工級氧化鎂改性粉電性能預估值為冷態絕緣耐壓強度3365 V，泄漏電流0.112 mA，熱態絕緣耐壓強度2399 V。
- Abstract:
-
To improve its insufficient electrical property and make it more suitable for the electric heating tube manufacturing industry after modification, the plain electrical grade magnesium oxide powder was modified by adding silica,additive used in electrical grade magnesium oxide powder and silicone oil.Therefore, 25 groups of ratios were designed to carry out combined experiments. On the basis of the orthogonal experiment method. Analyze the optimal ratio under a single indicator (normal withstand voltage, leakage current and heating withstand voltage) with the range method. Also the matrix analysis method was used to analysis and optimize to obtain the optimal ratio,and the index value prediction method was used to predict the electrical property of the final ratio of modified electrical grade magnesium oxide powder. Finally, the results showed that the content of silica is the main influencing factor when the normal and heating withstand voltage is used as the indicator. However, when using leakage current as an indicator, the content of silicone oil is the main influencing factor, followed by the content of additive used in electrical grade magnesium oxide powder. In addition, the final parameters of the optimally selected backfill are as follows: 0.25wt% of silica,2wt% of additive used in electrical grade magnesium oxide powder,0.25wt% of silicone oil. Its estimated values of electrical properties of the final ratio of modified electrical grade magnesium oxide powder are normal withstand voltage of 3365 V, leakage current of 0.112 mA, heating withstand voltage of 2399 V.
參考文獻/References:
\[1\]高陟，馬北越，任鑫明，等．耐火材料\[J\]，2020，54（1）：88-92．
GAO Z，MA B Y，REN X M，et al．Refractories\[J\]，2020，54（1）: 88-92．
\[2\]胡慶福．鎂化合物生產與應用\[M\]．北京：化學工業出版社，2004：11-77．
HU Q F．Production and Application of Magnesium Compounds\[M\]．Beijing：Chemical Industry Press，2004：11-77．
\[3\]郭杰，劉百寬，田曉利，等．非金屬礦\[J\]，2019，42（5）：45-48．
GUO J，LIU B K，TIAN X L，et al．NonMetallic Mines\[J\]，2019，42（5）: 45-48．
\[4\]蔣小蒙．菱鎂礦熔煉電熔鎂砂節能新工藝及方鎂石結晶過程研究\[D\]．沈陽：東北大學，2011．
JIANG X M．Study on Advanced Energy Conservation Technology for Fused Magnesia Smelt from Magnesite and the Crystallization Process of Periclase\[D\]．Shenyang：Northeastern University，2011．
\[5\]FU Y，WANG N H，WANG Z，et al．Journal of Materials Processing Technology\[J\]，2017，244: 231-239．
\[6\]CHAI T Y，WU Z W，WANG H． IFAC PapersOnLine\[J\]，2017，50（1）: 14992-14999．
\[7\]羅仙平，李建康，徐徽，等．鹽業與化工\[J\]，2016，45（8）：8-13．
LUO X P，LI J K，XU H，et al．Journal of Salt and Chemical Industry\[J\]，2016，45（8）: 8-13．
\[8\]胡慶福，宋麗英，劉寶樹，等．無機鹽工業\[J\]，2009，41（4）：8-10．
HU Q F，SONG L Y，LIU B S，et al． Inoaganic Chemicals Industry\[J\]，2009，41（4）: 8-10．
\[9\]宗�。胤N鎂化物(氧化鎂)的現狀與發展趨勢\[C\]//2020年鎂化合物行業年會暨專家工作會議論文集．河北：中國無機鹽工業協會鎂化合物分會，2020：11-22．
ZONG J．The Current Situation and Development Trend of Special Magnesium Compounds(Magnesium Oxide)\[C\]//2020 Magnesium Compound Industry Annual Meeting and Expert Working Conference Proceedings．Hebei：Magnesium Compound Branch of China Inorganic Salt Industry Association， 2020：11-22．
\[10\]胡慶福，胡曉湘，宋麗英，等．化工進展\[J\]，2005，24（1）：28-31．
HU Q F，HU X X，SONG L Y，et al．Chemical Industry and Engineering Progress\[J\]，2005，24（1）: 28-31．
\[11\]胡慶福，劉景澤，宋麗英，等．無機鹽工業\[J\]，2006，38（9）：13-16．
HU Q F，LIU J Z，SONG L Y，et al．Inoaganic Chemicals Industry\[J\]，2006，38（9）: 13-16．
\[12\]楊樹，劉百寬，田曉利，等．硅酸鹽通報\[J\]，2019，38（9）：2777-2781．
YANG S，LIU B K，TIAN X L，et al．Bulletin of the Chinese Ceramic Society\[J\]，2019，38（9）: 2777-2781．
\[13\]季克捷，杜永平，王洪元．一種電工級氧化鎂粉添加劑的制造方法: CN107200591B\[P\]．2020-04-07．
JI K J，DU Y P，WANG H Y．A Preparation Method for Electrical Grade Magnesium Oxide Powder Additive: CN107200591B\[P\]．2020-04-07．
\[14\]倪忠偉，王繼奇，史生川，等．一種防潮改性電工級氧化鎂的制備方法以及應用: CN109135339A \[P\]．2019-01-04．
NI Z W，WANG J Q，SHI S C，et al．A Preparation Method and Application for MoistureProof Modified Electrical Grade Magnesium Oxide Powder: CN109135339A\[P\]．2019-01-04．
\[15\]宗俊．電工級氧化鎂發展現狀和趨勢\[C\]//2006年中國鎂鹽行業年會暨新技術、新產品、新設備推介會論文集．河北：中國無機鹽工業協會鈣鎂鹽分會， 2006：71-76．
ZONG J．Development Status and Trend of Electrical Grade Magnesium Oxide Powder\[C\]//2006 China Magnesium Salt Industry Annual Conference and New Technology, New Products, New Equipment Promotion Conference Proceedings. Hebei：Calcium and Magnesium Salt Branch of China Inorganic Salt Industry Association，2006：71-76．
\[16\]鄭水林，王彩麗，李春全．粉體表面改性\[M\]．北京：中國建材工業出版社，2019：12．
ZHENG S L，WANG C L，LI C Q．Powder Surface Modification\[M\]．Beijing：China Building Materials Industry Press，2019：12．
\[17\]周玉珠．?dāng)?shù)學的實踐與認識\[J\]，2009，39（2）：202-207．
ZHOU Y Z．Mathematics in Practice and Theory\[J\]，2009，39（2）: 202-207．
\[18\]趙風文，胡建華，曾平平，等．中國有色金屬學報\[J\]，2021，31（4）：1096-1105．
ZHAO F W，HU J H，ZENG P P，et al．The Chinese Journal of Nonferrous Metals\[J\]，2021，31（4）: 1096-1105．
備注/Memo
- 備注/Memo:
-
收稿日期：2021-08-18修回日期：2021-12-06
第一作者：劉權，男，1997年生，碩士
通訊作者：劉百寬，男，1961年生，教授級高工，碩士生導師，
Email:liubaikuan@punai.com
更新日期/Last Update:
2023-09-28