«上一篇/Previous Article|本期目錄/Table of Contents|下一篇/Next Article»

j.issn.1674-3962.202106024]
點擊復制

TC21鈦合金網籃組織特征對力學性能的影響研究()

中國材料進展[ISSN:1674-3962/CN:61-1473/TG]

卷:: 42
期數:: 2023年第08期

頁碼:: 657-661

欄目:

出版日期:: 2023-08-31

文章信息/Info

Title:: Influence of Basket Microstructure Characteristics on Mechanical Properties of TC21 Titanium Alloy

文章編號:: 1674-3962(2023)08-0657-05

作者:: 王哲1; 劉程程2; 李海賓3; 1.陜西宏遠航空鍛造有限責任公司，陜西咸陽 713801 2.北京星航機電裝備有限公司，北京 100074 3.中航天地激光科技有限公司，北京 102209

Author(s):: WANG Zhe1; LIU Chengcheng2; LI Haibin3; 1.Shaanxi Hongyuan Aviation Forging Co., Ltd., Xianyang 713801, China 2.Beijing Xinghang Electro-Mechanical Equipment Co.,Ltd., Beijing 100074, China 3.AVIC Tiandi Laser Technology Company Co.,Ltd., Beijing 102209, China

關鍵詞:: TC21鈦合金; 網籃組織; β相區鍛造; 片層α相; 晶界α相

Keywords:: TC21 titanium alloy; basket microstructure; β region forging; lamellar α phase; grain boundary α phase

分類號:: TG146.23

DOI:: 10.7502/j.issn.1674-3962.202106024

文獻標志碼:: A

摘要:: TC21鈦合金是我國自主研發的一種高強高韌損傷容限型鈦合金，分別采用準β鍛造、準β鍛造+(α+β)鍛造以及β鍛造工藝對TC21鈦合金進行鍛造，采用金相顯微鏡和掃描電子顯微鏡研究了鍛造工藝對TC21鈦合金顯微組織的影響規律，以及顯微組織與力學性能之間的關系。結果表明：采用準β鍛造(Tβ+15 ℃)后，TC21鈦合金顯微組織特征為破碎的β晶粒和編織程度較好的網籃組織，并且該組織具有良好的強度塑性韌性匹配；采用準β鍛造后再進行(α+β)相區小變形，顯微組織中部分片層α相呈短棒狀分布，且網籃編織程度較差，強度與塑性與準β鍛造后相當，但斷裂韌性較差；在較高溫度(Tβ+25 ℃)進行鍛造，TC21鈦合金顯微組織中形成粗大平直的晶界α相，材料的強度、塑性和韌性均較低。

Abstract:: TC21 titanium alloy is a kind of titanium alloy with high strength and high toughness damage tolerance developed independently in China. In this paper, quasi-β forging, quasi-β forging +(α+β) forging and β forging process were used to forge TC21 titanium alloy. The influence of forging process on microstructure of TC21 titanium alloy and the relationship between microstructure and mechanical properties were studied by optical microscope (OM) and scanning electron microscope (SEM). The results showed that: after quasi-β forging (Tβ+15 ℃), the microstructure of TC21 titanium alloy was characterized by broken β grains and well-woven basket structure, which had good strength-plastic-toughness matching; after small deformation of (α+β) phase region after quasi-β forging, the α phases were distributed in short rod shape, and the weave degree of the basket was poor; the strength and plastic properties of the basket are similar to those of quasi-β forging, but the fracture toughness was poor; after high temperature (Tβ+25 ℃) forging, coarse and straight grain boundary α phase was formed, the strength, plasticity and toughness of the material were low.

參考文獻/References:

\[1\]陳偉. TC21鈦合金損傷容限性能研究\[D\]. 南京：南京航空航天大學, 2008. CHEN W. Research on the Damage Tolerance of TC21 Titanium Alloy\[D\]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2008. \[2\]WANG Z, WANG X N, ZHU Z S. Journal of Alloys & Compounds\[J\], 2017, 692: 149-154. \[3\]WU M, MI G, LI P, et al.Materials Letters\[J\], 2022, 310:131-135. \[4\]朱知壽，王新南，童路，等. 稀有金屬快報\[J\], 2006, 25(12): 27-31. ZHU Z S, WANG X N, TONG L, et al. Rare Metals Letters\[J\], 2006, 25(12): 27-31. \[5\]辛社偉，周偉，李倩，等，中國材料進展\[J\], 2021, 40(6):5-9. XIN S W, ZHOU W,LI Q, et al. Materials China\[J\], 2021, 40(6):5-9. \[6\]房衛萍，陳淪，史耀武，等. 材料工程\[J\]，2010，22(9)：95-98. FANG W P, CHEN L, SHI Y W. et al. Journal of Material Engineering\[J\], 2010,22(9): 95-98. \[7\]趙永慶，奚正平，曲恒磊. 航空材料學報\[J\]，2003，23(3): 215-219. ZHAO Y Q, XI Z P, QU H L. Journal of Aeronautical Materials\[J\],2003, 23(3):215-219. \[8\]楊慧麗. 中國金屬通報\[J\], 2013， 34(14):44-45. YANG H L. China Metal Bulletin\[J\], 2013, 34(14): 44-45. \[9\]朱知壽，王新南，顧偉，等. 中國材料進展\[J\], 2009，28（2）：51-55. ZHU Z S, WANG X N, GU W, et al. Materials China\[J\], 2009,28(2): 51-55. \[10\]黨薇, 薛祥義, 寇宏超,等.航空材料學報\[J\], 2010(3):19-23. DANG W, XUE X Y, KOU H C, et al. Journal of Aeronautical Materials\[J\], 2010(3):19-23. \[11\]唐斌, 王義紅, 寇宏超,等. 材料熱處理學報\[J\], 2012, 33(1):49-53. TANG B, WANG Y H, KOU H C, et al.Transactions Materials and Heat Treatment\[J\], 2012, 33(1): 49-53. \[12\]SHI Z F, GUO H Z, ZHANG J W, et al.Transaction of Nonferrous Metals Society of China\[J\], 2018, 28(12): 51-59. \[13\]溫鑫. TC21鈦合金多層次組織對力學性能的影響\[D\]. 貴陽:貴州大學, 2019. WEN X, The Effect of MultiLevel Microstructure on Mechanical Properties of TC21 Titanium Alloy\[D\]. Guiyang: Guizhou University, 2019. \[14\]王哲，王新南，商國強，等. 稀有金屬材料與工程\[J\]，2018,47(3):810-815. WANG Z, WANG X N, SHANG G Q, et al. Rare Materials and Engineering\[J\], 2018,47(3):810-815. \[15\]胡生雙, 孟曉川, 王清,等. 金屬熱處理\[J\], 2020, 513(5): 117-121. HU S S, MENG X C, WANG Q, et al. Heat Treatment of Metals\[J\], 2020, 513(5):117-121. \[16\]劉知多,張浩宇,周舸,等.稀有金屬材料與工程\[J\], 2023, 52(2):658-666. LIU Z D, ZHANG H W, ZHOU K, et al. Rare Metal Materials and Engineering\[J\], 2023, 52(2):658-666. \[17\]歐陽德來,謝有美,胡圣偉,等.稀有金屬材料與工程\[J\], 2023, 52(2):710-718. OUYANG D L, XIE Y M,, HU S W, et al.Rare Metal Materials and Engineering\[J\], 2023, 52(2):710-718. \[18\]李輝，曲恒磊，趙永慶，等. 材料工程\[J\]，2006，24(4)：21-23. LI H, QU H L, ZHAO Y Q, et al. Journal of Material Engineering\[J\], 2006,24(4): 21-23. \[19\]趙彥蕾，李伯龍，朱知壽，等.材料熱處理學報\[J\], 2011，32(1): 14-18. ZHAO Y L, LI B L, ZHU Z S, et al.Transactions Materials and Heat Treatment\[J\], 2011,32(1): 14-18.

備注/Memo

備注/Memo:: 收稿日期：2021-06-28修回日期：2021-12-06 第一作者：王哲，男，1987年生，高級工程師， Email:tianchenzhe@163.com

常用功能

工具/Tools

統計/Statistics

摘要瀏覽/Viewed2181
全文下載/Downloads1609
評論/Comments

更新日期/Last Update: 2023-07-28

亚洲国产aⅴ成人精品无吗,中文字幕999精品,人妻人人妻a乱aa乱,日韩三级aaaaa,亚洲午夜成人精品无码色欲,国产第一页第二页av,老熟女北岛玲888av,99re热这里只有精品18,久久精品中文字幕久久