文章信息/Info

Title:

Mechanisms and Growth Rate Models for Stress Corrosion Cracking in High Temperature Water

作者:

呂戰鵬

（1. 上海大學材料科學與工程學院，上海 200072)
（2. 上海大學 省部共建高品質特殊鋼冶金與制備國家重點實驗室，上海 200444）

Author(s):

LU Zhanpeng

（1. School of Materials Science and Engineering, Shanghai University, Shanghai 200072，China）
（2. State Key Laboratory of Advanced Special Steels, Shanghai University, Shanghai 200444, China)

關鍵詞:

應力腐蝕開裂; 核電站; 高溫水; 裂紋擴展速率; 氧化動力學; 裂尖應變速率

Keywords:

stress corrosion cracking;  nuclear power plant;  high temperature water;  crack growth rate;  oxidation kinetics;  crack tip strain rate

DOI:

10.7502/j.issn.1674-3962.201904012

文獻標志碼:

A

摘要:

核電站結構材料在高溫水中應力腐蝕開裂是影響安全運行的重要因素�？偨Y(jié)了合金成分、載荷和環境介質等多種因素對奧氏體合金在高溫水中應力腐蝕開裂擴展過程的影響規律,簡要介紹了幾種應力腐蝕開裂機理模型。分析了高溫水中的應力腐蝕開裂基元過程，提出了載荷對合金在高溫水中界面反應的物理加速作用和物理化學加速作用原理。發展了基于連續介質力學裂紋尖端力學場與氧化動力學相結合的裂紋擴展速率的形變/氧化交互作用理論模型，針對模型中使用的準固態氧化動力學規律以及裂尖漸進場的適用性進行了分析，發現環境溫度、材料成分和水化學對氧化動力學的影響與相應條件下奧氏體合金應力腐蝕開裂行為變化特征相對應，裂尖漸進場的適用性也得到了驗證。將形變/氧化交互作用模型應用于多種條件下不銹鋼和鎳基合金在壓水堆一回路水中應力腐蝕開裂擴展速率評價，所得模型預測結果與實驗室和現場數據結果相一致。

Abstract:

Stress corrosion cracking (SCC) of structural materials in high temperature water in nuclear power plants is one of the important factors for the safety operation. In this paper, the effects of alloy composition, loading and environmental factors on SCC growth of austenitic alloys in high temperature water environments are reviewed. Some available SCC mechanisms are briefly introduced. The element processes involved in SCC are categorized, and the physical degradation and physical�瞔hemical degradation modes due to loading on the interfacial reactions in high temprature water are proposed. The deformation/oxidation interaction model for SCC growth rate is developed, based on the combination of the crack tip continuum mechanics and the oxidation kinetics. The fittness for the adopted oxidation kinetics and the crack tip asymptotic field in the SCC growth rate model is checked. It is found that the effects of temperature, material composition and water chemistry on oxidation kinetics correspond well to their effects on SCC growth rate. The compatibility of the adopted crack tip mechanical field is also confirmed. The calculated results with the developed SCC growth rate model based on deformation/oxidation interaction are found to be consistent with the reported experimental SCC growth rates and plant data.