[1]陳靜,王一平,楊穎,等.一種低溫共燒壓電陶瓷的制備[J].中國材料進展,2012,(4):030-33.[doi:10.7502/j.issn.1674-3962.2012.04.04]
CHEN Jing,WANG Yiping,YANG Ying,et al.Piezoelectric Ceramic Multilayers Prepared by a Low Temperature Co Firing Process[J].MATERIALS CHINA,2012,(4):030-33.[doi:10.7502/j.issn.1674-3962.2012.04.04]
點擊復制
一種低溫共燒壓電陶瓷的制備(
)
中國材料進展[ISSN:1674-3962/CN:61-1473/TG]
- 卷:
-
- 期數:
-
2012年第4期
- 頁碼:
-
030-33
- 欄目:
-
特約研究論文
- 出版日期:
-
2012-04-25
文章信息/Info
- Title:
-
Piezoelectric Ceramic Multilayers Prepared by a Low Temperature Co Firing Process
- 作者:
-
陳靜; 王一平; 楊穎; 陳吉; 顧新云
-
(南京航空航天大學航天工程學院 機械結構力學及控制國家重點實驗室，江蘇 南京 210016)
- Author(s):
-
CHEN Jing; WANG Yiping; YANG Ying; CHEN Ji; GU Xinyun
-
(State Key Laboratory of Mechanics and Control of Mechanical Structures, College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China)
-
- 關鍵詞:
-
低溫共燒陶瓷（LTCC）; 壓電陶瓷; 多層膜
- DOI:
-
10.7502/j.issn.1674-3962.2012.04.04
- 文獻標志碼:
-
A
- 摘要:
-
壓電陶瓷多層膜的低溫共燒特性及壓電性能密切依賴于其成分。采用調節壓電材料成分，以0.90Pb(Zr 0 48Ti052)O3 005Pb(Mn 1/3Sb2/3)O3005Pb(Zn1/3Nb2/3)O3四元體系為研究對象，同時添加燒結助劑CuO來實現多層膜的低溫?zé)Y(jié)。對多層膜的流延、排膠、燒結、極化等工藝進行探索以?xún)?yōu)化工藝參數,最終獲得850℃燒結溫度下的高致密度多層壓電陶瓷。壓電性能的測試表明三層結構的壓電多層膜陶瓷表觀d33達873pC/N,遠高于同成分單層陶瓷306 pC/N的d33值。采用多普勒激光測振儀進行掃頻實驗，測定了多層陶瓷縱向振動速度的頻譜，確定了基于該多層膜壓電振子的最優諧振頻率。
- Abstract:
-
In this research, piezoelectric ceramic multilayers based on 090Pb(Zr 0 48Ti052)O3005Pb(Mn 1/3Sb2/3)O3 005Pb(Zn1/3 Nb2/3)O3 quaternary system with silver inner electrodes have been successfully prepared. The process of tape casting, sintering, and poling are intensively investigated. The sintering temperature for the multilayers has been lowered to 850 ℃ by using CuO as the additive. High density is obtained in the multilayer structures even at this low sintering temperature. The piezoelectric measurements display that the ceramic with 3 layers presents piezoelectric coefficient d33 of 873pC/N, which is almost linear with the d 33 value of 306 pC/N of the monolayer ceramic. The fabricated ceramic multilayers can be beneficial to the integration of the piezoelectric devices.
更新日期/Last Update:
2012-06-13